网站标志
点评详情
发布于:2019-5-3 05:01:59  访问:57 次 回复:0 篇
版主管理 | 推荐 | 删除 | 删除并扣分
Are You Searching For Much More Benefits Of Fados9f1
In addition to the FADOS7F1, the FADOS9F1 offers two additional features such as programmable power supply as well as IR Temperature measurement of non-contact. The programmable power supply which is included in the product will be connected to the UUT powerlines to set a maximum voltage. Then the �test button� will be activated, the software included in the device will produce an output of 100mV which will step up to the maximum value. The voltage value and the current value will be made to save in a file. And the IR Temperature measurement will be done after some time which will be used to determine the component with high temperature as well as defect related.
This technique is also dealt with the maximum voltage is made to be adjusting with the connection of power cable in the intact board input. Normally, This adjustment method is developed by the �Power Test� button, which provides desired result from 0 to 100mV voltage. The desired result is obtained to draw the graph and get the record if necessary. After few minutes, the desired result of voltage graph provides temperature map, which helps to IR sensor. Then the IR sensor is also used to calculate some other component temperature. An intact card graph is required to be testing only defected circuit board.
It doesn�t make any difference even though the testing objects comes from the automotive sector, medical sector, audio, video, motor control, mobile phone, or other areas which make use of electronic components. The Fados9f1 T ester is very reliable and useful for troubleshooting the electronic circuits. The excellent benefit of this test method deals with troubleshooting the circuits without app lying any power to UUT a s this makes the system to avoid the risk involved in the process which may lead to consequential damages. So that there will not occur any short circuit, low-impedance connections or defective components.
The 1st feature of this Fados9f1 C ircuit is the Programmable DC Power Supply which is adjustable and you can adjust the voltage and current with the output power. The voltage can be adjusted from 0 to 16V and the current can be adjusted from 20mA to 1500 mA and it will produce the V/I graph of the electronic power supply. The �IR Temperature Measurement Sensor� is its 2 nd feature and it is used to find the components which generate high temperature. By including these two features, the device helps to decrease the time of troubleshooting the malfunctions by five to ten minutes . This is also a very new technique of troubleshooting.
There are nine functions in this device. They are Analog Voltage Output, Measuring Equipment for Capacitor, Fault Detection by Comparison from memory, DC Power Supply Output developed with adjustable voltage and current, Diode and Resistor, Equivalent Circuit diagram, Double Channel Fault Detection, Double Channel Digital PC Oscilloscope, Square Wave Signal Output between 0.2 kHz and 25 kHz and Non Touched IR Temperature Sensor. The common features are to be analyzed from VI Curve and it`s also very difficult to search some other product.
This technique is also dealt with the maximum voltage is made to be adjusting with the connection of power cable in the intact board input. Normally, This adjustment method is developed by the �Power Test� button, which provides desired result from 0 to 100mV voltage. The desired result is obtained to draw the graph and get the record if necessary. After few minutes, the desired result of voltage graph provides temperature map, which helps to IR sensor. Then the IR sensor is also used to calculate some other component temperature. An intact card graph is required to be testing only defected circuit board.
In addition to the FADOS7F1, the FADOS9F1 offers two additional features such as programmable power supply as well as IR Temperature measurement of non-contact. The programmable power supply which is included in the product will be connected to the UUT powerlines to set a maximum voltage. Then the �test button� will be activated, the software included in the device will produce an output of 100mV which will step up to the maximum value. The voltage value and the current value will be made to save in a file. And the IR Temperature measurement will be done after some time which will be used to determine the component with high temperature as well as defect related.
The amazing package of this system comes with FADOS9F1 product, two oscilloscope probes, USB cable, Ground cable, IR Temperature sensor, red power cable with alligator clips, black power cable with alligator clips, power adaptor of 19V and 3.9A, CD along with software and user manual of the fados9f1 program . Many companies and departments are suffering to troubleshoot and to repair the electronic boards. But with the help of this device, it can be done easily as well as quickly in their work process daily. This is also one of the major benefits of the system and it will be very helpful for them.
共0篇回复 每页10篇 页次:1/1
共0篇回复 每页10篇 页次:1/1
我要回复
回复内容
验 证 码
看不清?更换一张
匿名发表 

Copyright © 2007-2015 China800.Net 石家庄网人信息技术有限公司版权所有

WangRen Network Limited is a registered China company.

../../|PHPweb|boy119:zhuanke163